View CPL225PD12_4792807.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

AC-DC Open Frame 100-225 Watts CPL Series
*
THE XPERTS IN POWER
Isolated Outputs * High Peak Current Ratings * Compact PCB Construction * Optional Remote On/Off * Adjustable Output Voltage * EN55022 Level B * Cover, Connector & Loom Kits Available
Specification
Input
Input Voltage Input Frequency Inrush Current Power Factor Earth Leakage Current * * * * * 85-264 VAC (120-370 VDC) 47-63 Hz 15/30 A at 120/230 VAC in, 100% load & 25 C 0.99 typical at 100 VAC, 0.93 typical at 200 VAC & 100% load to IEC61000-3-2 0.75 mA max at 230 VAC 60 Hz Options * Designated by the following suffixes to the model number: Reduce leakage current <0.1 mA `-G' Remote ON/OFF `-R' Cover fitted `-C' Screw terminals `-T' Add 4 outputs by the addition of a DC-DC converter to the board `-Z' Contact Sales Office
Output
Output Voltage Output Voltage Adjustment Minimum Load Start Up Time Hold Up Time Line Regulation Load Regulation Ripple & Noise Overcurrent Protection Overvoltage Protection * * * * * * * * * * See Tables 10% V1 only No minimum load required V1 250 ms, V2 500ms V1 40 ms, V2 20 ms at 120 VAC 0.4% max over specified input range 0.8% max for a 100% load change 150 mV pk-pk max (0 C to +50 C) >105% of rated current on V1 & >101% of peak current on V2 auto recovery >115% of nominal value for V1 & 115-140% of nominal value for V2 74-83% depending on specific model 3000 VAC Input to Output 2000 VAC Input to Ground 500 VAC Output to Ground V1 to V2 100 VAC 1 min, cut off current 100 mA, 100 VDC 10 M min 80-500 kHz
Environmental
Operating Temperature Storage Temperature Humidity Shock Vibration * * * * * -10 C to +70 C (See Derating Curve) -20 C to +75 C 20-90% RH, non condensing 196.1 m/s2 (20 G), 11 ms once each X, Y & Z axis 2 G 10-55 Hz, 3 axis
EMC & Safety
Emissions ESD Susceptibility Radiated Susceptibility EFT/Burst Surge Safety Approvals * * * * * * EN55022 Level B conducted EN55022 Level B radiated EN61000-4-2 Level 2 contact Level 3 air EN61000-4-3 Level 3 EN61000-4-4 Level 3 EN61000-4-5 Level 3 line to line Level 4 line to ground UL1950, C-UL, EN60950, VDE0160
General
Efficiency Isolation * *
Switching Frequency *
*
*
www.xpplc.com
sales@xpplc.com
OUTPUT VOLTAGE & CURRENT RATINGS - 100 WATT MODEL
Output Voltage +5 V1 +24 V2 +5 V1 +12 V2 Current Rating Maximum Peak(1) 5.0 A 4.0 A 7A 5.0 A 5.0 A 10 A Regulation Line Load 20 mV 40 mV 96 mV 150 mV 20 mV 40 mV 48 mV 100 mV Ripple & Noise pk-pk(2) 120 mV 150 mV 120 mV 150 mV Efficiency(3) Typical 80% 76% Model Number
CPL
CPL100PD24 CPL100PD12
*
Notes 1. Peak rating for 10 sec with a duty cycle of 35% max. 2. Measured with 22F cap within 150 mm of output terminal at 20 MHz bandwidth. 3. Measured at 200 VAC input & 100% load.
Mechanical Details - 100 Watt Models
I/O Connector CN1 CN2 B3P5-VH B8P-VH
Mating Connector VHR-5N VHR-8N XHP-2 XHP-3
CN3 B2B-XH-A (Option) CN4 B3B-XH-A (Option)
Terminal Chain: SVH-21T-P1.1 Loose: 8VH-21T-P1.1 Chain: SVH-21T-P1.1 Loose: 8VH-21T-P1.1 Chain: SXH-001-P0.6 Loose: BXH-001T-P0.6 Chain: SXH-001-P0.6 Loose: BXH-001T-P0.6
Pin No. 1 2 3 4 5
CN1 Input AC(L) AC(N) FG
Pin No. 1, 2 3, 4 5, 6 7, 8
CN2 Output G2 V2 G1 V1
CN3 (Optional) Pin No. Remote On/Off 1 RC(+) 2 RC(-)
CN4 (Optional) Pin No. `-Z' 1 + 2 COM 3 -
NOTES: * Weight 420g or less (without chassis & cover). * Tolerance 1. * Dimensions in mm. * PCB Material : CEM3. * Optional chassis & cover, order part no. CPL100 COVER or add suffix `-C' to the model number to receive the unit with the cover fitted. * Mounting torque 1.5N m (16 kgf cm) max. * Keep drawing current per pin below 5 A (7 A @ pk load) for CN2. * Optional connector kit available, order part no. CPL100/150 CON. * Optional loom kit available, order part no. CPL100/150 LOOM.
Derating Curves - 100 Watt Models
OPEN FRAME COVER FITTED (>90 VAC INPUT)
www.xpplc.com
sales@xpplc.com
OUTPUT VOLTAGE & CURRENT RATINGS - 150 WATT MODEL
Output Voltage +5 V 1 +24 V 2 +5 V 1 +12 V 2 Notes
1. Peak rating for 10 sec with a duty cycle of 35% max. 2. Measured with 22 F cap within 150 mm of output terminal at 20 MHz bandwidth. 3. Measured at 200 V AC input & 100% load.
CPL
Efficiency(3) Typical 82% 79% Model Number CPL150PD24 CPL150PD12
Current Rating Maximum Peak(1) 5.0 A 6.0 A 10 A 5.0 A 7.5 A 14 A
Regulation Line Load 20 mV 40 mV 96 mV 150 mV 20 mV 40 mV 48 mV 100 mV
Ripple & Noise pk-pk(2) 120 mV 150 mV 120 mV 150 mV
*
Mechanical Details - 150 Watt Models
I/O Connector CN1 CN2 B3P5-VH B8P-VH
Mating Connector VHR-5N VHR-8N XHP-2 XHP-3
CN3 B2B-XH-A (Option) CN4 B3B-XH-A (Option)
Terminal Chain: SVH-21T-P1.1 Loose: 8VH-21T-P1.1 Chain: SVH-21T-P1.1 Loose: 8VH-21T-P1.1 Chain: SXH-001-P0.6 Loose: BXH-001T-P0.6 Chain: SXH-001-P0.6 Loose: BXH-001T-P0.6
CN1 Pin No. 1 2 3 4 5 Input AC(L) AC(N) FG Pin No. 1, 2 3, 4 5, 6 7, 8
CN2 Output G2 V2 G1 V1
NOTES: * Weight 530g or less (without chassis & cover). * Tolerance 1. * Dimensions in mm. * PCB Material : CEM3. * Optional chassis & cover, order part no. CPL150 COVER or add suffix `-C' to the model number to receive the unit with the cover fitted. * Mounting torque 1.5N m (16 kgf cm) max. * Ensure current per pin is below 5 A (7 A @ pk load) for CN2. * Optional connector kit available, order part no. CPL100/150 CON. * Optional loom kit available, order part no. CPL100/150 LOOM.
CN3 (Optional) Pin No. Remote On/Off 1 RC(+) 2 RC(-)
CN4 (Optional) Pin No. `-Z' 1 + 2 COM 3 -
Derating Curves - 150 Watt Models
OPEN FRAME COVER FITTED (>90 VAC INPUT)
www.xpplc.com
sales@xpplc.com
OUTPUT VOLTAGE & CURRENT RATINGS - 225 WATT MODEL
Output Voltage +5 V1 +24 V2 +5 V1 +12 V2 Notes
1. Peak rating for 10 sec with a duty cycle of 35% max. 2. Measured with 22 F cap within 150 mm of output terminal at 20 MHz bandwidth. 3. Measured at 200 V AC input & 100% load.
CPL
Efficiency(3) Typical 83% 79% Model Number CPL225PD24 CPL225PD12
Current Rating Maximum Peak(1) 5.0 A 9.0 A 14 A 5.0 A 10.0 A 20 A
Regulation Line Load 20 mV 40 mV 96 mV 150 mV 20 mV 40 mV 48 mV 100 mV
Ripple & Noise pk-pk(2) 120 mV 150 mV 120 mV 150 mV
*
Mechanical Details - 225 Watt Models
I/O Connector CN1 CN2 B3P5-VH B8P-VH
Mating Connector VHR-5N VHR-8N XHP-2 XHP-3
CN3 B2B-XH-A (Option) CN4 B3B-XH-A (Option)
Terminal Chain: SVH-21T-P1.1 Loose: 8VH-21T-P1.1 Chain: SVH-21T-P1.1 Loose: 8VH-21T-P1.1 Chain: SXH-001-P0.6 Loose: BXH-001T-P0.6 Chain: SXH-001-P0.6 Loose: BXH-001T-P0.6
Pin No. 1 2 3 4 5
CN1 Input AC(L) AC(N) FG
Pin No. 1, 2, 3 4, 5, 6 7, 8 9, 10
CN2 Output G2 V2 G1 V1
CN3 (Optional)
CN4 (Optional)
Pin No. `-Z' Pin No. Remote On/Off NOTES: 1 + 1 RC(+) * Weight 700g or less (without chassis & cover). 2 COM * Tolerance 1. 2 RC(-) * Dimensions in mm. 3 * PCB Material : CEM3. * Optional chassis & cover, order part no. CPL225 COVER or add suffix `-C' to the model number to receive the unit with the cover fitted. * Mounting torque 1.5N m (16 kgf cm) max. * Keep drawing current per pin below 5 A (7 A @ pk load) for CN2. * Optional connector kit available, order part no. CPL225 CON. * Optional loom kit available, order part no. CPL225 LOOM.
Derating Curves - 225 Watt Models
OPEN FRAME COVER FITTED (>90 VAC INPUT)
www.xpplc.com
sales@xpplc.com
Rev 3.0

▲Up To Search▲

Price & Availability of CPL225PD12

	To Download CPL225PD12 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .